Whether you're tackling corrugated roads, rough terrain or planning to tow a caravan across the country, a TJM XGS Series 4000 suspension upgrade will improve every aspect of your drive. This S4000 front strut suits the Isuzu D-MAX 08/2020 on. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. However, a TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.�

TJM XGS U-bolts are matched in length to our leaf spring range to accommodate increased spring thickness. This XGS U-bolt is 14 x 62 x 210mm with a forged top drivers side for Toyota Hilux front suspension and should be used when upgrading to TJM leaf springs. We recommend replacing factory fitted U-bolts when new springs are installed. The thread of your vehicle's existing U-bolts thread may have stretched from usage and could work loose with the installation of a new spring pack.�

TJM XGS U-bolts are matched in length to our leaf spring range to accommodate increased spring thickness. This XGS U-bolt is 14 x 72 x 215mm with a square top (B) and should be used when upgrading to TJM leaf springs. We recommend replacing factory fitted U-bolts when new springs are installed. The thread of your vehicle's existing U-bolts thread may have stretched from usage and could work loose with the installation of a new spring pack.

When new springs are installed on your vehicle, reusing the existing U-bolts could create a potentially dangerous situation. This XGS U-bolt is 14 x 62 x 180mm with a square top (B) and should be used when upgrading to TJM leaf springs. If the original U-bolt is reused the pitch of the thread may be stretched, which can cause the U-bolt nut to loosen, thereby causing the spring pack to become loose. We highly recommend replacing U-bolts when new springs are installed. TJM XGS U-bolts are matched in length to our XGS leaf spring range to accommodate the increased spring stack height.

TJM XGS U-bolts are matched in length to our leaf spring range to accommodate increased spring thickness. This U-bolt is 14 x 75 x 185mm with a and should be used when upgrading to TJM leaf springs. We recommend replacing factory fitted U-bolts when new springs are installed. The thread of your vehicle's existing U-bolts thread may have stretched from usage and could work loose with the installation of a new spring pack.�

This rear tailshaft spacer kit suits Mitsubishi Triton ML / MN vehicles. Bearing spacer kits are required to realign a vehicle's tailshaft when suspension has been raised.

TJM XGS U-bolt is matched in length to our leaf spring range to accommodate increased spring thickness. This U-bolt is 14 x 83 x 215mm and should be used when upgrading to TJM leaf springs. We recommend replacing factory fitted U-bolts when new springs are installed. The thread of your vehicle's existing U-bolts thread may have stretched from usage and could become loose with the installation of a new spring pack.

TJM XGS sway bar relocation brackets are required to gain maximum suspension travel.

Coil springs are one of the hardest working suspension components in a vehicle, supporting a vehicle's weight, 24-hours a day. This TJM XGS spring extra heavy-duty rear pair suits Toyota Landcruiser 200 Series with raised rear and constant loads. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Upgrading your vehicle's factory fitted springs will improve performance for challenging off-road conditions and when adding load bearing accessories.

TJM coil springs are made in Australia from the finest quality high-stress spring steel. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Our coil springs are manufactured on computer-controlled coiling machines, scragged before and after shot peening, load-tested and finished with a durable powdercoat finish.

Coil springs are one of the hardest working suspension components in a vehicle, supporting a vehicles weight, 24-hours a day. This TJM XGS spring coil, heavy-duty rear pair suits Ford Everest 2015+ vehicles. Our progressive coils offer a balanced ride with a lower spring rate that progresses to an increased spring rate. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. From low load bearing accessories (LBA) weight to improved load carrying performance, progressive coils offer a host of benefits. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. TJM XGS progressive coils provide a smooth and comfortable ride with a low initial spring rate that progresses to a higher spring rate. Progressive coils improve stability, support low load bearing accessory (LBA) weight and enhance load carrying ability when your vehicle is loaded. Designed to increase the spring rate as the load increases, there is less tendency to bottom out, which goes a long way towards making your ride more comfort. Perfect for vehicles that only carry weight from time to time. Our coil springs are manufactured on computer-controlled coiling machines, scragged before and after shot peening, load-tested and finished with a durable powdercoat finish

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.�

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. This TJM XGS spring coil rear pair suits Toyota Landcruiser 80 / 100 Series vehicles with raised height. Our progressive coils offer a balanced ride with a lower spring rate that progresses to an increased spring rate. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. From low load bearing accessories (LBA) weight to improved load carrying performance, progressive coils offer a host of benefits. Upgrading your vehicle's factory fitted springs will improve performance for challenging off-road conditions and when adding load bearing accessories.�

TJM coil springs are made in Australia from the finest quality high-stress spring steel. This TJM XGS spring coil, rear pair suits Toyota armoured vehicles 2005+. TJM XGS progressive coils provide a smooth and comfortable ride with a low initial spring rate that progresses to a higher spring rate. Progressive coils improve stability, support low load bearing accessory (LBA) weight and enhance load carrying ability when your vehicle is loaded. Designed to increase the spring rate as the load increases, there is less tendency to bottom out, which goes a long way towards making your ride more comfort. Perfect for vehicles that only carry weight from time to time. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.�

Coil springs are one of the hardest working suspension components in a vehicle, supporting a vehicles weight, 24-hours a day. This TJM XGS spring coil front pair suits Toyota Landcruiser 76/78/79 Series vehicles. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.�

TJM coil springs are made in Australia from the finest quality high-stress spring steel. This TJM XGS spring coil front pair suits Toyota Landcruiser 80 / 100 Series vehicles. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Upgrading your vehicle's factory fitted springs will improve performance for challenging off-road conditions and when adding load bearing accessories.�

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. This TJM XGS spring coil, front pair suits Mitsubishi Triton MQ and Pajero Sport models. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.

TJM coil springs are made in Australia from the finest quality high-stress spring steel. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Our coil springs are manufactured on computer-controlled coiling machines, scragged before and after shot peening, load-tested and finished with a durable powdercoat finish.�

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. This TJM XGS spring coil, front pair suits Holden Colorado vehicles with raised height. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.�

Coil springs are one of the hardest working suspension components in a vehicle, supporting a vehicles weight, 24-hours a day. This TJM XGS spring heavy-duty front pair suits Toyota Landcruiser 76/78/79 Series. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.�

Coil springs are one of the hardest working suspension components in a vehicle, supporting a vehicle's weight, 24-hours a day. This TJM XGS spring coil, heavy-duty front pair suits Toyota Hilux / Fortuner / Prado 150 series vehicles. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Upgrading your vehicle's factory fitted springs will improve performance for challenging off-road conditions and when adding load bearing accessories.

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. This TJM XGS spring coil, extra heavy-duty front pair suits Toyota Landcruiser 200 Series. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.

TJM coil springs are made in Australia from the finest quality high-stress spring steel. This TJM XGS spring coil, heavy-duty front pair suits Ford Ranger PX1/2, Ford Everest and Mazda BT50 vehicles. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Our coil springs are manufactured on computer-controlled coiling machines, scragged before and after shot peening, load-tested and finished with a durable powdercoat finish.

TJM coil springs are made in Australia from the finest quality high-stress spring steel. This TJM XGS spring coil, front pair suits Holden Colorado RG 04/2013 - 06/2016 vehicles. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Upgrading your vehicle's factory fitted springs will improve performance for challenging off-road conditions and when adding load bearing accessories.

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.

TJM coil springs are made in Australia from the finest quality high-stress spring steel. This TJM XGS spring coil, heavy-duty front pair suits Toyota Prado 120 / 150 LWB, Fortuner, Hilux 09/2015+, FJ Cruiser and Holden Colorado 09/2016+ models. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Upgrading your vehicle's factory fitted springs will improve performance for challenging off-road conditions and when adding load bearing accessories.�

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. This TJM XGS heavy-duty spring coil front pair suits your Volkswagen Amarok V6. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Our coil springs are manufactured on computer-controlled coiling machines, scragged before and after shot peening, load-tested and finished with a durable powdercoat finish.�

Coil springs are one of the hardest working suspension components in a vehicle, supporting a vehicles weight, 24-hours a day. This TJM XGS spring coil, heavy-duty front pair suits the Volkswagen Amarok. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.�

TJM coil springs are made in Australia from the finest quality high-stress spring steel. This TJM XGS spring coil, heavy-duty front pair suits Mitsubishi Triton ML / MN models. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Our coil springs are manufactured on computer-controlled coiling machines, scragged before and after shot peening, load-tested and finished with a durable powdercoat finish.�

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. This TJM XGS spring coil, heavy-duty front pair suits Mitsubishi Triton MQ models. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.�

Coil springs are one of the hardest working suspension components in a vehicle, supporting a vehicle?s weight, 24-hours a day. This TJM XGS spring coil, heavy-duty front pair suits Holden Colorado RG 04/2013 - 08/2016 vehicles. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Our coil springs are manufactured on computer-controlled coiling machines, scragged before and after shot peening, load-tested and finished with a durable powdercoat finish.

TJM coil springs are made in Australia from the finest quality high-stress spring steel. This TJM XGS spring coil, heavy-duty front pair suits Holden Colorado vehicles. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.

Coil springs are one of the hardest working suspension components in a vehicle, supporting a vehicles weight, 24-hours a day. This TJM XGS spring coil, front pair suits Ford Ranger PX1/2, Ford Everest and Mazda BT-50 2011+ with raised height. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.�

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. This TJM XGS spring coil, front pair suits Nissan Navara NP300 (Australian delivered) vehicles. Our linear coils provide a regular spring rate that offers consistent suspension performance. TJM coil springs offer improved ground clearance and stability, optimum carrying capacity and ride comfort. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.

Each TJM coil spring is made to our exact specifications. Designed and tested by local engineers our range incorporates a host of unique design features to suit your vehicle. This TJM XGS spring coil, heavy-duty front pair suits Ford Ranger PX1/2, Ford Everest and Mazda BT-50 vehicles. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Your original factory springs will often be subject to fatigue and reduced performance when subject to additional LBA weight or use in extreme environments.�

TJM coil springs are made in Australia from the finest quality high-stress spring steel. This TJM XGS extra heavy-duty spring coil front pair suits Toyota Landcruiser 76/78/79 Series with raised height. TJM XGS linear (or constant rate) coils provide a consistent spring rate in all situations. This coil spring design is suited to most 4WD vehicles to increase ride height, support high load bearing accessory (LBA) weight and improve stability. Ideal for vehicles with upgrades like steel bull bars and winch combinations. Our coil springs are manufactured on computer-controlled coiling machines, scragged before and after shot peening, load-tested and finished with a durable powdercoat finish.�

TJM XGS spring hanger RHS anti-inversion type to suit Toyota vehicles.

TJM XGS spring hanger LH anti-inversion type to suit Toyota vehicles.

Whether you're tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, a TJM XGS Series 4000 suspension upgrade will improve every aspect of your drive. This S4000 XT front strut suits Mitsubishi Triton MQ raised height vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.

Installing a set of TJM XGS Series 4000 shock absorbers will immediately transform your vehicle's ride, handling, load carrying and towing capabilities. This S4000 rear shock suits Holden Colorado RG 07/2016+ and LDV T60 vehicles. These shocks are ideal for light to medium loads. With a host of premium features and ultra tough construction, you'll get more out of your vehicle. Designed and engineered in Australia for extreme conditions by our expert engineering team with over 30 years' experience in purpose-built 4x4 suspension. Our shock absorbers adjust more rapidly to changing road, off-road and weight conditions better than many other 4WD shocks. The result is precise vehicle control with uncompromised performance and ride comfort.

Installing a set of shock absorbers, a pair of springs or a full TJM XGS Series 4000 suspension kit will immediately transform your vehicles ride handling, load carrying and towing capabilities. This S4000 XT front strut suits Toyota Hilux 09/2015+ vehicles. You will be equipped for a smoother, more comfortable ride whilst also improving road handling, braking ability, noise and vibration. Get the most out of your vehicle both on and off road with a TJM suspension upgrade.

TJM XGS Series 4000 shocks are the perfect choice when you need improved vehicle control, exceptional ride comfort at increased ride heights, and improved load carrying ability. This S4000 front shock suits Toyota Landcruiser 70 Series V8 vehicles. These shocks are ideal for light to medium loads. With a host of premium features and ultra tough construction, you'll get more out of your vehicle. Designed and engineered in Australia for extreme conditions by our expert engineering team with over 30 years' experience in purpose-built 4x4 suspension. Our shock absorbers adjust more rapidly to changing road, off-road and weight conditions better than many other 4WD shocks. The result is precise vehicle control with uncompromised performance and ride comfort.

Installing a set of TJM XGS Series 4000 shock absorbers will immediately transform your vehicle's ride, handling, load carrying and towing capabilities. This S4000 rear shock suits Volkswagen Amarok 2011+ vehicles. These shocks are ideal for light to medium loads. With a host of premium features and ultra tough construction, you'll get more out of your vehicle. Designed and engineered in Australia for extreme conditions by our expert engineering team with over 30 years' experience in purpose-built 4x4 suspension. Our shock absorbers adjust more rapidly to changing road, off-road and weight conditions better than many other 4WD shocks. The result is precise vehicle control with uncompromised performance and ride comfort.

Installing a set of shock absorbers, a pair of springs or a full TJM XGS Series 4000 suspension kit will immediately transform your vehicle's ride handling, load carrying and towing capabilities. This S4000 XT front strut suits Ford Ranger PX1/PX2 and Mazda BT-50 raised height vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.�

Whether you are tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, a TJM XGS Series 4000 suspension upgrade will improve every aspect of your drive. This S4000 front strut suits Toyota Landcruiser 200 Series raised height vehicles. You will be equipped for a smoother, more comfortable ride whilst also improving road handling, braking ability, noise and vibration. Get the most out of your vehicle both on and off road with a TJM suspension upgrade.

Whether you are tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, a TJM XGS Series 4000 suspension upgrade will improve every aspect of your drive. This S4000 front strut suits Holden Colorado RG and Isuzu D-MAX vehicles. You will be equipped for a smoother, more comfortable ride whilst also improving road handling, braking ability, noise and vibration. Get the most out of your vehicle both on and off road with a TJM suspension upgrade.

Whether you're tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, a TJM XGS Series suspension upgrade will improve every aspect of your drive. This front strut suits Volkswagen Amarok raised height vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.

Installing a set of shock absorbers, a pair of springs or a full TJM XGS Series 4000 suspension kit will immediately transform your vehicle's ride handling, load carrying and towing capabilities. This S4000 front strut suits Nissan Mercedes X Class raised height vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.

Installing a set of shock absorbers, a pair of springs or a full TJM XGS Series 4000 suspension kit will immediately transform your vehicle's ride handling, load carrying and towing capabilities. This S4000 front strut suits Mitsubishi Triton MQ raised height vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.

Whether you're tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, a TJM XGS Series 4000 suspension upgrade will improve every aspect of your drive. This S4000 front strut suits Holden Colorado RG and Isuzu D-MAX vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.�

Whether you're tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, a TJM XGS Series 4000 suspension upgrade will improve every aspect of your drive. This S4000 front strut suits Holden Colorado RG 09/2016+ and LDV T60 vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.

Installing a set of shock absorbers, a pair of springs or a full TJM XGS Series 4000 suspension kit will immediately transform your vehicles ride handling, load carrying and towing capabilities. This S4000 front strut suits Mitsubishi Triton ML - MN raised height vehicles. You will be equipped for a smoother, more comfortable ride whilst also improving road handling, braking ability, noise and vibration. Get the most out of your vehicle both on and off road with a TJM suspension upgrade.

nstalling a set of shock absorbers, a pair of springs or a full TJM XGS Series 4000 suspension kit will immediately transform your vehicle's ride handling, load carrying and towing capabilities. This S4000 front strut suits Toyota Hilux and Fortuner 09/2015+ vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.

Whether you are tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, a TJM XGS Series 4000 suspension upgrade will improve every aspect of your drive. This S4000 front strut suits Ford Ranger PX1/PX2 and Mazda BT-50 raised height vehicles. You will be equipped for a smoother, more comfortable ride whilst also improving road handling, braking ability, noise and vibration. Get the most out of your vehicle both on and off road with a TJM suspension upgrade.

Installing a set of TJM XGS Series 4000 shock absorbers will immediately transform your vehicle's ride, handling, load carrying and towing capabilities. This S4000 rear shock suits Toyota Fortuner 2015+ vehicles. With multi-stage velocity controlled valving, big bore piston and 20mm hard chromed piston rods, these shocks are built tough. Whether you install only shock absorbers, springs or a complete TJM XGS suspension kit you are sure to notice an immediate improvement in the vehicle's ride, handling, towing and load carrying qualities. Our specialist team of suspension engineers have developed this range right here in Australia for road use all the way through to demanding 4X4 applications.

Installing a set of shock absorbers, a pair of springs or a full TJM XGS Series 4000 suspension kit will immediately transform your vehicle's ride handling, load carrying and towing capabilities. This S4000 front strut suits Nissan Navara NP300 raised height vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.

TJM XGS Series 4000 shocks are the perfect choice when you need improved vehicle control, exceptional ride comfort at increased ride heights, and improved load carrying ability. This S4000 rear shock suits Toyota Landcruiser 80 & 105 Series vehicles. Our S4000 shocks feature twin tube case protection, a 20mm hard-chromed piston rod, big bore piston and multi-stage velocity controlled valving. Whether you install only shock absorbers, springs or a complete TJM XGS suspension kit you are sure to notice an immediate improvement in the vehicle's ride, handling, towing and load carrying qualities. That's why a TJM XGS suspension upgrade is the wise choice for four wheel drivers or light commercial vehicle users for reliable performance both on and off road.�

This TJM XGS S4000 rear shock suits Toyota Hilux 2015+ vehicles. With multi-stage velocity controlled valving, big bore piston and 20mm hard chromed piston rods, these shocks are built tough. Whether you install only shock absorbers, springs or a complete TJM XGS suspension kit you are sure to notice an immediate improvement in the vehicle's ride, handling, towing and load carrying qualities. Our specialist team of suspension engineers have developed this range right here in Australia for road use all the way through to demanding 4X4 applications

Installing a set of TJM XGS Series 4000 shock absorbers will immediately transform your vehicle's ride, handling, load carrying and towing capabilities. This S4000 rear shock suits Toyota Landcruiser 200 Series vehicles. . With a host of premium features and ultra tough construction, you'll get more out of your vehicle. Designed and engineered in Australia for extreme conditions by our expert engineering team with over 30 years' experience in purpose-built 4x4 suspension. Our shock absorbers adjust more rapidly to changing road, off-road and weight conditions better than many other 4WD shocks. The result is precise vehicle control with uncompromised performance and ride comfort.

Installing a set of TJM XGS Series 4000 shock absorbers will immediately transform your vehicle's ride, handling, load carrying and towing capabilities. Our S4000 shocks feature twin tube case protection, a 20mm hard-chromed piston rod, big bore piston and multi-stage velocity controlled valving. Whether you install only shock absorbers, springs or a complete TJM XGS suspension kit you are sure to notice an immediate improvement in the vehicle's ride, handling, towing and load carrying qualities. That's why a TJM XGS suspension upgrade is the wise choice for four wheel drivers or light commercial vehicle users for reliable performance both on and off road.

Installing a set of TJM XGS Series 4000 shock absorbers will immediately transform your vehicle's ride, handling, load carrying and towing capabilities. This S4000 rear shock suits Mitsubishi Triton MQ vehicles. These shocks are ideal for light to medium loads. With a host of premium features and ultra tough construction, you'll get more out of your vehicle. Designed and engineered in Australia for extreme conditions by our expert engineering team with over 30 years' experience in purpose-built 4x4 suspension. Our shock absorbers adjust more rapidly to changing road, off-road and weight conditions better than many other 4WD shocks. The result is precise vehicle control with uncompromised performance and ride comfort.�

TJM XGS Series 4000 shocks can be adjusted to suit different springs and ride heights to level the front end of your 4X4. This S4000 rear shock suits Mitsubishi Triton ML/MN and Nissan Navara D22 vehicles. Our S4000 shocks feature twin tube case protection, a 20mm hard-chromed piston rod, big bore piston and multi-stage velocity controlled valving. Whether you install only shock absorbers, springs or a complete TJM XGS suspension kit you are sure to notice an immediate improvement in the vehicle's ride, handling, towing and load carrying qualities. That's why a TJM XGS suspension upgrade is the wise choice for four wheel drivers or light commercial vehicle users for reliable performance both on and off road.

TJM XGS Series 4000 shocks are the perfect choice when you need improved vehicle control, exceptional ride comfort at increased ride heights, and improved load carrying ability. This S4000 rear shock suits Ford Ranger and Mazda BT-50 vehicles. With multi-stage velocity controlled valving, big bore piston and 20mm hard chromed piston rods, these shocks are built tough. Whether you install only shock absorbers, springs or a complete TJM XGS suspension kit you are sure to notice an immediate improvement in the vehicle's ride, handling, towing and load carrying qualities. Our specialist team of suspension engineers have developed this range right here in Australia for road use all the way through to demanding 4X4 applications.

TJM XGS Series 4000 shocks are the perfect choice when you need improved vehicle control, exceptional ride comfort at increased ride heights, and improved load carrying ability. With multi-stage velocity controlled valving, big bore piston and 20mm hard chromed piston rods, these shocks are built tough. Whether you install only shock absorbers, springs or a complete TJM XGS suspension kit you are sure to notice an immediate improvement in the vehicle's ride, handling, towing and load carrying qualities. Our specialist team of suspension engineers have developed this range right here in Australia for road use all the way through to demanding 4X4 applications.�

TJM XGS Series 4000 shocks are the perfect choice when you need improved vehicle control, exceptional ride comfort at increased ride heights, and improved load carrying ability. This S4000 rear shock suits Ford Everest 06/2015+ vehicles. Our S4000 shocks feature twin tube case protection, a 20mm hard-chromed piston rod, big bore piston and multi-stage velocity controlled valving. Whether you install only shock absorbers, springs or a complete TJM XGS suspension kit you are sure to notice an immediate improvement in the vehicle's ride, handling, towing and load carrying qualities. That's why a TJM XGS suspension upgrade is the wise choice for four wheel drivers or light commercial vehicle users for reliable performance both on and off road.�

TJM XGS Series 4000 shocks are the perfect choice when you need improved vehicle control, exceptional ride comfort at increased ride heights, and improved load carrying ability. With multi-stage velocity controlled valving, big bore piston and 20mm hard chromed piston rods, these shocks are built tough. Whether you install only shock absorbers, springs or a complete TJM XGS suspension kit you are sure to notice an immediate improvement in the vehicle's ride, handling, towing and load carrying qualities. Our specialist team of suspension engineers have developed this range for road use all the way through to demanding 4X4 applications.�

The TJM XGS range of leaf springs is made from the finest quality spring steel and offers you improved ride performance for round town, off-road and even trades use. This TJM XGS extra heavy-duty leaf spring suits Holden Colorado RG 09/2016+ and LDV T60 vehicles. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs. An excellent choice to upgrade your vehicles handling, TJM XGS leaf springs are available in medium or heavy-duty load carrying capacities for most vehicles.

The TJM XGS range of leaf springs is made from the finest quality spring steel and offers you improved ride performance for round town, off-road and even trades use. This TJM XGS heavy-duty leaf spring suits Holden Colorado RG 09/2016+ and LDV T60 vehicles. TJMs cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs. An excellent choice to upgrade your vehicles handling, TJM XGS leaf springs are available in medium or heavy-duty load carrying capacities for most vehicles.�

TJM XGS greaseable pin to suit Toyota vehicles. Greaseable shackle pins allow regular greasing of bushes to reduce friction and operating temperatures and extend the lifecycle of bushes.

Upper Control Arm Kit camber kit allowing adjustment to factory (OE) camber specifications for vehicles with raised suspension setups.

TJM XGS leaf springs will provide your vehicle with a significant improvement in load carrying ability, towing safety, ride comfort and directional stability. This TJM XGS raised leaf spring suits Nissan Navara NP300 vehicles. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs. An excellent choice to upgrade your vehicle?s handling, TJM XGS leaf springs are available in medium or heavy-duty load carrying capacities for most vehicles.�

The TJM XGS range of leaf springs is made from the finest quality spring steel and offers you improved ride performance for round town, off-road and even trades use. This TJM XGS raised comfort leaf spring suits Mitsubishi Triton MQ Exceed / GLS vehicles. Our leaf springs use high-grade spring steel and are perfect for 4WD enthusiasts, boat and caravan owners, tradies and those looking to improve handling performance. For off-road use, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. TJM?s cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs.�

TJM XGS spring and shackle bush kit suit your Mitsubishi Triton ML-MN. TJM bushes ensure the positive location of suspension components which helps provide direct responsive steering, low maintenance and improved stability. We offer a wide range of bush kits including leaf spring, panhard rod and control arm bushes.�

TJM XGS spring and shackle bush kit suit your Ford Ranger PX 2011+. TJM bushes ensure the positive location of suspension components which helps provide direct responsive steering, low maintenance and improved stability. We offer a wide range of bush kits including leaf spring, panhard rod and control arm bushes

TJM XGS leaf springs have a proven track-record in outback Australia, with our leaf springs used by many mining, commercial and Government agencies over the past 30 years. This TJM XGS extra heavy-duty raised leaf spring suits Toyota Landcruiser 78 / 79 Series 1999+ vehicles. When you're off-road, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. Our cutting-edge design and manufacturing techniques offers you a smooth riding leaf spring. TJM XGS leaf springs are available in either medium or heavy-duty load carrying capacities for most vehicles and also offers a usage for some commercial environments.

TJM XGS leaf springs have a proven track-record in outback Australia, with our leaf springs used by many mining, commercial and Government agencies over the past 30 years. This TJM XGS extra heavy-duty leaf spring suits Volkswagen Amarok vehicles. Our leaf springs use high-grade spring steel and are perfect for 4WD enthusiasts, boat and caravan owners, tradies and those looking to improve handling performance. For off-road use, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs.�

The TJM XGS range of leaf springs is made from the finest quality spring steel and offers you improved ride performance for round town, off-road and even trades use. This TJM XGS heavy-duty constant load raised leaf spring suits Toyota Landcruiser 76 Series vehicles. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs. An excellent choice to upgrade your vehicles handling, TJM XGS leaf springs are available in medium or heavy-duty load carrying capacities for most vehicles.�

TJM XGS leaf springs will provide your vehicle with a significant improvement in load carrying ability, towing safety, ride comfort and directional stability. This TJM XGS extra heavy-duty raised leaf spring suits Toyota Landcruiser 78 / 79 Series 1999+ vehicles. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs. An excellent choice to upgrade your vehicles handling, TJM XGS leaf springs are available in medium or heavy-duty load carrying capacities for most vehicles.�

TJM XGS leaf springs will provide your vehicle with a significant improvement in load carrying ability, towing safety, ride comfort and directional stability. This TJM XGS extra heavy-duty raised leaf spring suits Toyota Hilux 2005-2015 vehicles. When you're off-road, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. Our cutting-edge design and manufacturing techniques offers you a smooth riding leaf spring. TJM XGS leaf springs are available in either medium or heavy-duty load carrying capacities for most vehicles and also offers a usage for some commercial environments

The TJM XGS range of leaf springs is made from the finest quality spring steel and offers you improved ride performance for round town, off-road and even trades use. This TJM XGS heavy-duty leaf spring, 10 leaf and 2-stage suits Toyota Landcruiser 75 Series vehicles. When you're off-road, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. Our cutting-edge design and manufacturing techniques offers you a smooth riding leaf spring. TJM XGS leaf springs are available in either medium or heavy-duty load carrying capacities for most vehicles and also offers a usage for some commercial environments.

The TJM XGS range of leaf springs is made from the finest quality spring steel and offers you improved ride performance for round town, off-road and even trades use. This TJM XGS extra heavy-duty leaf spring suits Holden Colorado RG 06/2012 to 8/2016 and Isuzu D-Max 06/2012+ vehicles. When you're off-road, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. Our cutting-edge design and manufacturing techniques offers you a smooth riding leaf spring. TJM XGS leaf springs are available in either medium or heavy-duty load carrying capacities for most vehicles and also offers a usage for some commercial environments.

TJM XGS leaf springs have a proven track-record in outback Australia, with our leaf springs used by many mining, commercial and Government agencies over the past 30 years. This TJM XGS extra heavy-duty leaf spring for rear suits Ford Ranger and Mazda BT-50 09/2011+ vehicles. When you're off-road, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. Our cutting-edge design and manufacturing techniques offers you a smooth riding leaf spring. TJM XGS leaf springs are available in either medium or heavy-duty load carrying capacities for most vehicles and also offers a usage for some commercial environments.�

The TJM XGS range of leaf springs is made from the finest quality spring steel and offers you improved ride performance for round town, off-road and even trades use. This TJM XGS extra heavy-duty leaf spring suits Toyota Hilux 09/2015+ vehicles. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs. An excellent choice to upgrade your vehicles handling, TJM XGS leaf springs are available in medium or heavy-duty load carrying capacities for most vehicles.�

The TJM XGS range of leaf springs is made from the finest quality spring steel and offers you improved ride performance for round town, off-road and even trades use. This TJM XGS extra heavy-duty leaf spring suits Nissan Navara NP300 vehicles. Our leaf springs use high-grade spring steel and are perfect for 4WD enthusiasts, boat and caravan owners, tradies and those looking to improve handling performance. For off-road use, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs.

TJM XGS leaf springs have a proven track-record in outback Australia, with our leaf springs used by many mining, commercial and Government agencies over the past 30 years. This TJM XGS heavy-duty raised leaf spring suits Toyota Landcruiser 78 / 79 Series 1999+ vehicles. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs. An excellent choice to upgrade your vehicle?s handling, TJM XGS leaf springs are available in medium or heavy-duty load carrying capacities for most vehicles.�

TJM XGS leaf springs will provide your vehicle with a significant improvement in load carrying ability, towing safety, ride comfort and directional stability. This TJM XGS heavy-duty leaf spring suits Toyota Hilux 09/2015+ vehicles. Our leaf springs use high-grade spring steel and are perfect for 4WD enthusiasts, boat and caravan owners, tradies and those looking to improve handling performance. For off-road use, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs.�

TJM XGS leaf springs have a proven track-record in outback Australia, with our leaf springs used by many mining, commercial and Government agencies over the past 30 years. This TJM XGS heavy-duty raised leaf spring suits Toyota Hilux 2005-2015 vehicles. Our leaf springs use high-grade spring steel and are perfect for 4WD enthusiasts, boat and caravan owners, tradies and those looking to improve handling performance. For off-road use, the improved flexibility of our leaf springs results in better traction due to increased wheel travel and ground clearance. TJM cutting-edge design and manufacturing techniques ensures the production of consistently smooth-riding springs.�